RedFoot Fiat Smart Levelling Systems

The Redfoot Fiat Smart Levelling Systems are compatible with both iPhone and Android smart phones System.

This is the industry’s new standard and it has changed the way leveling is done. Redfoot Smart Level allows you to level your Fiat motorhome with your smart phone by using built in Bluetooth capability.  The automatic, one touch operation levels your motorhome in less than two minutes.

This sequential leveling is a patented process that provides a more precise level throughout the length of the vehicle, adding stability to the vehicle while leveling it as low to the ground as possible. It is quick, easy and on the level!

SPECIFICATIONS

Fiat Ducato Motorhomes in Australia can come in many different configurations. When selecting a levelling system for your Fiat Ducato Motorhome it is important to know what chassis type you have.

Fiat Ducato Motorhomes are imported either with a Fiat ‘CCS Cab’ chassis or an ‘AL-KO’ attached chassis. That is the first difference to understand. The second difference is the location of the rear axle in the chassis. The rear axle position is either UNDER the chassis, or THROUGH the chassis.

An axle position UNDER the Chassis means the rear axle sits under the chassis rail leading to an increased height from the ground to the bottom of the chassis rail. This vehicle is considered ‘HIGH’ and Redfoot Levelling are able to use a single stage 13″ Hydraulic Cylinder on the rear of the vehicle that is less expensive. 

An axle position THROUGH the chassis (where the rear axle actually protrudes through the chassis) reduces the height from the ground to the bottom of the chassis rail, making the vehicle to sit lower to the ground. This vehicle is considered ‘LOW’ and Redfoot Levelling use a pair of two stage ‘Telescopic” hydraulic cylinders on the rear. It is a great solution but are more expensive.

All Fiat Ducato chassis use a pair two stage Telescopic hydraulic cylinders on the front. It is only the rear where the types of cylinders will vary.   

Choosing the custom Redfoot Fiat Ducato Smart Levelling system is as easy as 1,2,3,4.

Step 1. Determine RV Manufacturer and model of the Fiat. E.g. Jayco Conquest

Step 2. Determine the Vehicle Make and Chassis Model. E.g. FIAT Ducato X250 – AL-KO chassis (Check your compliance plate if unsure)

Step 3. Confirm and measure the underfloor to ground clearance behind the rear axle as shown in the diagram below. If your measurement is above 630 mm it will qualify as ‘HIGH’. If below this minimal measurement of 630 mm then it will qualify as ‘LOW’.

Step 4. Now compile your results from steps 1, 2 and 3 and select the appropriate Redfoot System based on the option selection drop downs above. E.g. FIAT DUCATO-X250-ALKO-HIGH

Please do not hesitate to contact us if you need further clarification or confirmation of the custom solution for your Fiat Motorhome.

INSTALLATION

Investing in a Redfoot Fiat Levelling system will bring years of added enjoyment and improved lifestyle with your Fiat Motorhome. The system prices are set out above. In addition to the system prices will be freight and that depends on where you live but generally ranges between $80 to $120. The Redfoot systems are delivered in environmentally friendly packaging that is boxed an placed on a skid (half pallet). This ensures every system is well protected during shipping.

The Redfoot systems can be DIY installed provided there is a good level of mechanical skills available, and access to a mechanical workshop with suitable hoists. We provide a comprehensive installation manual.

We recommend the installation is done by one of our approved installers. Not all installations are the same so a solid level of mechanical knowledge is required. Installation costs range from $2,000 at the low end and up to $3,000 at the high end. The reason they have a range is firstly because different installer have different cost structures, e.g. Sydney costs\rent versus say more country areas where costs can be lower. Secondly, not all installations are the same. For example the location of the hydraulic pump. Normally the pump is located in a storage compartment, however if the owner does not want the pump in a storage compartment then it can be located under the chassis. This will require extra work to build a protective box and accordingly lead to extra cost. Best thing is to talk with your installer about the installation cost. 

VIDEOS

Simple Auto levelling Overview

REVIEWS

LEGENDARY SERVICE

Redfoot Levelling is a division of Titan RV, a proudly Australian owned family business located in Brisbane, Queensland.

That means you can buy with confidence knowing that you are supporting an Aussie company with local support. Titan RV source 99% of their products from quality manufacturers in Australia and the USA.

We were founded on three core beliefs: Honesty, Reliability and Value which we strive to incorporate into all aspects of our business. These core beliefs are integrated into every product and every sale we make.

We pride ourselves in making available a range of quality products designed and tested for durability and performance, because when you are west of Timbuctoo, you need reliability of your equipment. Customer service is always our top priority.

If you have any questions or comments, feel free to contact us and rest assured that you will be speaking to an expert.

Delivery, services & returnS

Redfoot Levelling is all about legendary service. We can offer same day shipping.

Not happy with your product? Simply return it within 14 days for a full refund. No questions. Buy with confidence.

Questions & answers

Call us on 07 3286 1199. We are here for you and can assist in any way possible.